Automatic Abrasive Blast Equipment for Steel Pipes/Tube Factory

Product Description

Automatic Abrasive Blast Equipment for Steel Pipes/Tube

Regarding steel pipe with diameter of 16~600mm, we adopts V type conveyor which have an angle with steel pipe center line, steel pipe can rotation while going forward.

 

Regarding steel pipe with diameter of 159~2800mm, we adopts roller transmission, angle between roller is adjustable, running speed and rotation speed can be adjustable with large diameter, blasting wheel adopts bottom blasting distribution, cleaning efficiency is high, result is good.

 

Shots material circulation purification system takes overflow induction controllable full multi-stage curtain winnowing splitter and special polyester core elevator conveyor, achieves shot material sorting and recycling.

 

Blasting room adopts multi-layer seal curtain which is suitable for different diameters, shot blasting, dust removal system uses impulse reversal blowing filter cartridge dust collector, dust removal is good, life is long.

 

This equipment can be used for water, gas, mining, oil and pipe coating pretreatment, the seabed or desert gas such as duct blaster, it can improve the appearance quality of the product components and the state of the surface craft.

 

Equipment main structure and characteristics of steel pipe shot blasting equipment :

QG Series Steel Pipe shot blasting machine is consisted of shot blasting chamber, blasting wheel assembly, shot material cycle purify system, roller transmission system, dust removing system, electric control system and so on.

 

1.Shot blasting chamber

Shot blasting chamber is welded by Q235 steel plate and steel frame. Meanwhile, shot blasting chamber equip testing door, which is the seal space to clean the workpiece. Inside of shot blasting chamber is protected by cast iron protective plate (material ZCr5,thickness 10mm), meanwhile, it is impacted by protective cap.

 

2.Blasting wheel assembly

Two sides of top shot blasting machine equip two sets blasting wheel assembly. The location of blasting wheel is calculated by computer three-dimensional dynamic simulation. The location and angel are calculated by computer to assure the workpieces completely cleaning.

 

3.Shot material cycle purify system

It is consisted of screw conveyor, bucket elevator, shot and grit separator, supplying shot sluice valve ,slipping shot pipe and so on.

 

4.Roller transmission system

Transmission roller consists of charging roller and discharging roller.

 

5.Dust Collector

It consists of dust collector body, blower, settling tank and pipeline.This equipment takes two grade dust removal, the dust goes through settling tank first, the large grain will fall down through inertia, then large particles will come out by filter cylinder type.

Technical Parameter Automatic Abrasive Blast Equipment for Steel Pipes/Tube

Parameter	Dia of cleaning size(mm)	Cleaning speed(m/min)
QGN100	50-300	1-4
QGN700	325-720	1-2
QGN1000	720-1016	1-4
QGN1500	1016-1500	1-4

 

Q: How many days do you need to produce this Automatic Abrasive Blast Equipment for Steel Pipes?
A: It depends on the size of the machine. Usually 15-25 days for shot blasting machine and sand casting machine.45days for production line equipments.

Q: How to control your quality ?
A: First of all, we have professional technical team to design the machine. And we have strict production system, the quality inspection department will check the quality regularly.

For the smaller machine we will install the machine at our workshop to make sure it can work well.

For the bigger machine, we will install the machine for our customers until it can work well

Q: What's your machine quality guarantee?
A: Usually it's one year. We will choose the world famous brand components to keep our machine in perfect working condition.

Q: Can you instal the machine overseas?How long will it take?
A: YES, we have rich-experienced install team to instal the machine for our customers worldwide.